Wiring tests

The CB line is dedicated to the support of the operators during the production stage as well as to the testing of the finished product after the assembly and before the installation in the final apparatus, with the goal of identifying any short circuits/interruptions and the measurement of simple electro-technical components.

EST-NG offers a range of products for the production and testing of wiring:
from the simplest systems operating at low voltage and low current to the most sophisticated ones that can operate up to 5000 Vac and 50A.
Significant support for increased corporate efficiency and quality. A few tenths of a second to obtain a perfect result.

LOW VOLTAGE AND
LOW CURRENT TESTS

It is a modular low voltage and current system that makes possible to check for short circuits and interruptions up to a max of 10 Vdc and 5 mA with the possibility to check resistors, capacitors, diodes and LEDs inside the wiring. Each solid-state module has 128 channels each of which represents one side of the connection. The number of channels can be expanded up to 2560. It is a very fast system with an extremely convenient cost per channel.

2 or 4-WIRE
HIGH VOLTAGE TESTS

It is a modular high voltage and/or high current system that combines the advantages of low voltage with the ability to detect sheath defects that reduce insulation and/or cause weak crimping.
Each relay module has 16 channels and can be expanded up to 32768 channels.

  • Up to 1280 or 2560 channels
  • Rack-mount solution with integrated PC

Go to the product data sheet
  • Continuity threshold and programmable insulation from 50 Ω to 100 GΩ
  • CBH2-1000: Up to 1000Vac/1500Vdc 100mA
  • CBH2-5000: Up to 5000Vac/dc 100mA
  • Housing in 24UE / 40UE or double 40UE electrical cabinet
Go to the product data sheet
  • Continuity threshold and programmable insulation from 1mΩ to 100GΩ
  • CBH4-1000M: Up to 1000 Vac/1500 Vdc with micrometer for short circuit measurements
  • CBH4-1000C: Up to 1000 Vac/1500 Vdc with 50 A generator for short circuit measurements
  • CBH4-5000M: Up to 5000 Vac/ Vdc with micrometer for short circuit measurements
  • CBH4-5000C: Up to 5000 Vac/1500 Vdc with 50 A generator for short circuit measurements
  • Housing in 24UE / 40UE or double 40UE electrical cabinet
Go to the product data sheet

Service for the construction of testing tables

EST-NG also provides turnkey services for the design and drafting of assembly and testing tables.